7.62 Multi cal L.D.S.P. The Long Distance Service Provider

Long Distance Service Provider™  

The L.D.S.P. is beyond the standard in long distance precision. The L.D.S.P. gives precision accuracy with minimal and repeatable point of impact shift. The unique design of the L.D.S.P. provides outstanding sound suppression, and recoil reduction. The patented one piece core is machined from billet bar stock and has no internal welds, giving the L.D.S.P. extreme durability. The L.D.S.P. is direct-thread on in 5/8 x 24 and is full auto rated on barrels down to 10″ (5.5″ with .300blk).  Wrench flats are incorporated to allow easy pin and weld for shorter barrels. To order, contact your local Innovative Arms dealer or give us a call at 803-408-9955. Don’t have a dealer in your area? Use our dealer locator to find a dealer near you.

FIND A DEALER

The L.D.S.P. is rated for multiple calibers, including .300WM , 7.62, 308, .300blk, .243, .260, 6mm, 6.5, 5.56 and .223 on down. Adapters for barrels threaded 1/2 x 28 are available in our webstore. *The Exoskeleton Shroud is required for use with 300WM and recommended for full auto use.

*The L.D.S.P. is also available with our patented Exoskeleton™ Shroud. * The Exoskeleton™ Shroud gives many advantages, it also works as a heat sink and gives added grip when mounting the suppressor to the rifle.

As with all our silencers, the L.D.S.P. can be fired “wet” or “dry”.

Do not use a crush washer in conjunction with any Innovative Arms silencer.

L.D.S.P.

MSRP: $699

Caliber: 7.62
Weight: 23.5oz
Length: 8.5”
O.D: 1.5″
Material: Stainless Steel
Finish: Black, OD Green, FDE, Burnt Bronze, or Brushed Stainless
TPI: 5/8 x 24
DB Reduction: 33-36 Dry
FULL AUTO RATED

L.D.S.P. with Exoskeleton

MSRP: $749

Caliber: 7.62
Weight: 24oz
Length: 8.5”
O.D: 1.58″
Material: Stainless Steel
Finish: Black, OD Green, FDE, Burnt Bronze, or Brushed Stainless
TPI: 5/8 x 24
DB Reduction: 33-36 Dry
FULL AUTO RATED

1/2x28 Adapter

IAS caliber specific thread on rifle silencer in either 6.8 6.5 .243 or .204

IAS silencer is for those of us wanting something caliber specific for a particular host firearm. The IAS silencer can be ordered in either 6.8, 6.5, 7MM, .243, or .204. The patented one piece core is machined from billet bar stock and has no internal welds. The IAS is direct-thread on with a billet core and wrench flats to allow easy pin and weld. To order, contact your local Innovative Arms dealer or give us a call at 803-408-9955. Don’t have a dealer in your area? Use our dealer locator to find a dealer near you.

FIND A DEALER
  • Weight: 19.4oz (.204 cal is 17.5oz)
  • Length: 7” (.204 cal is 6.25″)
  • O.D: 1.5″
  • Material: All Stainless Steel
  • Finish: Black, OD Green, FDE, Burnt Bronze, or Brushed Stainless
  • TPI: 1/2 x 28, 9/16 x 24 or 5/8 x 24  
  • MSRP: $699 (.204 cal is $599)

 

To leave your review below, you must be an actual owner of this product, or a verified Innovative Arms Dealer. For verification purposes, the serial number, and/or product registration are required to be able to submit a review. 

Write Your Review

Special Orders
Average rating:  
 2 reviews
 by JAMBO, Commenting on his L.D.S.P. 7.62 with Exoskeleton Shroud

The weight is perfect, the durability is unmatched. CNC machined with no internal welds? You can't make a suppressor better than this. With my homemade subsonic ammo, it makes no noise louder than the snap of your fingers. With my supersonic loads at 100 yards, 500, and 1000 the point of impact does not change whether the suppressor is on the rifle or off. Whether I have my day scope on or my night vision or my thermal gear on it. It is dead on balls accurate. 

 

 

-Additional Information from JAMBO: Buy American or Piss Off...


 

 by James Carter, commenting on his L.D.S.P. 7.62 with Exoskeleton Shroud
Hey Man!

This suppressor is the best thing you can imagine. I could write a book on how good this suppressor is.